How To

How To Lower GPU Temperatures

Lower GPU Temperatures
Written by Martin Mcgaha

There’s no need to fear; we’ve got you covered with our step-by-step guide on how to lower GPU temperatures for good. Whereas, the consequence of this is that if the temperature of your GPU is excessive during a time of intense gaming, you run the danger of permanently destroying it. It is vital to understand how and when to reduce the thermostat temperature.

Overheating of a GPU may be caused by a variety of factors, and you may not be able to isolate the source of the problem on your first attempt. Even if these methods aren’t perfect, they may be put to good use to reduce the strain on your graphics card. To find a remedy, we must first understand why the GPU is overheating. In most cases, once the culprit has been located, the solution is straightforward. However, there are times when a solution is more difficult to come across.

The purpose of diagnostics is to discover whether your GPU is overheating. Your graphics card’s manufacturer determines the ideal gameplay temperature. It is between 60 and 70 Celsius for AMD, and between 70 and 85 Celsius for Nvidia’s GPUs. Some tools will be required to check your GPU’s current temperature.

Physically lowering the temperature of the GPU

In most situations, the cause of overheating is physical, and repairing it will need opening your case. Be cautious, and you’ll be alright with your computer’s internals.

Removal Of the Debris

1. The first thing you should do is open the case and check to see whether it needs to be cleaned. As a rule, this is how things work out.

2. Remove your graphics card from the motherboard to get the most out of the cleaning operation and achieve the best results.

3. The fans must be removed, which is an additional step, but it makes things a lot easier in the long run.

4. Compressed air and a cotton swab may be used to clean the GPU and fans, which contain several small and difficult-to-reach locations. The first step in removing dust is to use compressed air to blast it away, and then use a cotton swab to clean the rough parts. You must comply with this regulation, even if you have previously excluded certain components of your case from the statute of limitations. It is almost probable that dust has accumulated on the CPU, RAM, motherboard, and memory, among other possible areas.

5. Fortunately, since dust is the most common source of overheating, you should notice a significant improvement very immediately after cleaning and reassembling your computer.

All the fans must function properly

It’s easy to overlook the lack of fans when opening your case with the PC off. It’s easy to miss the absence of fan blades since this is how most cases open. The existence of a faulty fan may be validated or disproven. OPEN THE CASE WHILE THE COMPUTER IS ON! To start the computer, the PC case must be opened. Certain GPUs fans are engineered to only operate when needed, please notice. Reasons, when fans stop working, include:

1. Too much dust is a potentially hazardous situation. If you don’t clean your PC regularly, the GPU fan may cease operating.

2. Even if the power cables are not unplugged, it is quite easy for fans to stop working if the electricity is not being supplied to them.

3. In addition to fan bearing failure, another difficult-to-find but relatively simple-to-repair problem is the failure of the fan motor. If you must use WD-40, use a mild machine oil instead, which will be more effective.

4. If everything else fails, a faulty fan is most likely to be caused by this. As with any other machine, GPU fans will eventually fail. Fortunately, changing the fans on your graphics card does not need a total replacement.

Stock up on Thermal Paste

You may not be able to comprehend this difficulty. After removing the GPU, it’s impossible to identify whether this is causing the issue. Make sure to change the thermal paste on your card if you haven’t already done so, as it will assist to extend its lifespan.

1. The graphics card should be removed from the case before opening it so that you can more easily check all the other components after the case has been opened.

2. On the back of the card, you’ll see several screws that need to be tightened. Taking the heatsink out of the equation A backplate on your card is nothing more than an extra layer that must be removed before you can use it. After you’re finished, you may see that there are more wires connecting the PCB to the cooler. These should also be put out of service because of this.

3. Using rubbing alcohol (at its highest possible alcohol concentration) and a microfiber cloth or paper towel, wipe the thermal paste residue from the heatsink and chip off the surface of the device.

4. When applying thermal paste, it’s a good idea to experiment with several techniques if you don’t remember which one you used before. For the great majority of the time, using the ‘X’ strategy will keep you safe.

5. Before reassembling, place the heatsink on top of the chip. This is because the thermal paste must be evenly dispersed. After that, just reverse it. Reinstall the graphics card in the case and tighten the screws.

Boost the Case’s Airflow

Airflow is critical, even if it seems trivial. There is no universal answer since the solution is case-by-case. However, here are some suggestions:

1. It is important to plan the circulation such that cold air enters and heated air exits. You should aim for air to flow from the front to the rear and from the bottom to the top to get the best results.

2. It’s remarkable how much heat may be created by hurriedly positioned wire management. As a result, keeping cables neatly tucked away and out of the case’s airflow is highly recommended.

3. Directing hot air away from your GPU’s present location is the greatest technique to reduce its temperature. Make sure you can figure out how to get out of it.

Solve Your Issues With These Guides

How To Safely Underclock A GPU
When Should you Upgrade your CPU
How To Fix NVIDIA Geforce Experience Error Code 0x0003
How To Install An SSD On Your Desktop PC
How To Secure Erase An SSD
How To Overclock PC RAM
How To Install Windows
How To Overclock PC RAM
How To Install Windows

Gaming PC Guides

Best Gaming PC For Minecraft
Best Gaming PC For Warzone
Best Gaming PC Under 1000
Best Prebuilt Gaming PC Under 1500
Best Prebuilt Gaming PCs Under 2000
Best Gaming PC Build Under 600

Custom Gaming PC Builds:

Best Gaming PC Build Under 800.
Best Gaming PC Build Under 1000.
Best Gaming PC Build Under 600.

Benchmarks

System Requirements For Minecraft On PC
Salt and Sacrifice System Requirements On PC
System Requirements For Call Of Duty Warzone On PC

Conclusion

Overheating protection is now standard on most graphics cards, which automatically shut down if they get overheated. It’s possible that the PCB might be rendered unusable if this isn’t the case. Even though we’ve been concentrating on cooling the GPU, you should be aware that heat may harm any component of your PC. Almost all the suggestions in this article may be applied to those sections.

About the author

Martin Mcgaha

Martin is a tech blogger who started his blogging career in the toughest times of his life back in 2015. Over the course of 5 years, he experienced many ups and downs and mainly focused on providing the best content for his audience. Martin is also a 50% share holder at a corporate company named FifeMatrix. FifeMatrix is the owner of many tech blogs and Software Products.

Leave a Comment